easy-forum

English Support - Hardware => easy topics (general) => Thema gestartet von: gcatro am Juli 14, 2008, 16:00:46 Nachmittag

Titel: EasyNet with HMI: MFD4 – multi-function display
Beitrag von: gcatro am Juli 14, 2008, 16:00:46 Nachmittag

Dear All,

As I know that the maximum capability of EasyNet is limited to 8 Easy-8xx stations to be connected in a single bus.

however if I need to connect a HMI:MFD4 Touch screen using Easynet, do I have a limitation for an additional 7 Easy-8xx or is it possible with 8 Easy-8xx on the same EasyNet network?

Regards to All,

Titel: Re: EasyNet with HMI: MFD4 – multi-function display
Beitrag von: KressSwiss am Juli 14, 2008, 19:18:43 Nachmittag

Hi
I think the communication of an easy800 device with MI4 panel will be connectet by RS 232 interface of the easy800 device (PC-Port). In this case I mean there are 8 EASY connectable by Easy-Net

Link to the maual written in English:
ftp://ftp.moeller.net/AUTOMATION/APPLICATION_NOTES/an27i08g.pdf

Titel: Re: EasyNet with HMI: MFD4 – multi-function display
Beitrag von: Knodelpa am Juli 14, 2008, 20:01:09 Nachmittag

Hi gcatro,

you can use a MFD4 Panel with max. 7 other easy-NET devices !!!

Regards Paul

Titel: Re: EasyNet with HMI: MFD4 – multi-function display
Beitrag von: gcatro am Juli 14, 2008, 21:02:23 Nachmittag

Hi All,

Thank you KressSwiss for your participation, the screen you mention is MI4 and the one I am asking is MFD4 that have direct connection to EasyNet.

Thank you Paul for your help and support.

Regards,

Wassim