easy-forum

English Support - Hardware => easy topics (general) => Thema gestartet von: malik0101 am März 14, 2007, 10:44:17 Vormittag

Titel: Function: Stepping relay
Beitrag von: malik0101 am März 14, 2007, 10:44:17 Vormittag

Dear All Friends

I want to make a Ladder for Stepping relay. it have 2 NO contacts, simultaneously switched in an ON-OFF cycle.
1 in put and 2 out Put. it have 8 Step ,
Need Step 1. Switch 1. On
Need Step 2. Nothing Happend
Need Step 3. Switch 2. On
Need Step 4. Nothing Happend
Need Step 5. Nothing Happend
Need Step 6. Switch 1. On
Need Step 7. Nothing Happend
Need Step 8. Switch 2. On
Again it Go Back From Step 8 to Step 1. No Rest ....Like A Clock
Can Any one Help me

Titel: Re: Function: Stepping relay
Beitrag von: Mr. Spok am März 14, 2007, 11:09:57 Vormittag

Hello,

which hardware is used?

mfg Jan

Titel: Re: Function: Stepping relay
Beitrag von: Mr. Spok am März 14, 2007, 12:24:02 Nachmittag

Hello,

does the attached example fulfil the functions?

mfg Jan

Titel: Re: Function: Stepping relay
Beitrag von: malik0101 am März 14, 2007, 19:40:29 Nachmittag

i am using EASY 819 AC- RC....EASY SOFT 6

Titel: Re: Function: Stepping relay
Beitrag von: Mr. Spok am März 15, 2007, 07:19:50 Vormittag

Hello,

either you can for the programme appended above change the basic equipment, or you use the programme appended here for the  Easy 800. It works with other constituents but has the same function.

yours sincerely

Jan

Titel: Re: Function: Stepping relay
Beitrag von: malik0101 am März 15, 2007, 10:18:02 Vormittag

Dear Mr. Jan
 Thanks for Quick Reply
which Step Relay u Give in Attachment. Its Auto working
I Need Manual input If i on it it work if i leave this i stop on same
position. Again i on input it start from same point where i stop it
before. Same Like This Circuit I Need
ThaNKS

Titel: Re: Function: Stepping relay
Beitrag von: Mr. Spok am März 15, 2007, 11:17:50 Vormittag

Hello malik0101,

here now in the appendix two programmes with manual input.

Programme 1:   Step 1 to 8 then step 8 to 1 and again of the front.
Programme 2:   Step 1 to 8 then again of the front.


y.s.   Jan

Titel: Re: Function: Stepping relay
Beitrag von: malik0101 am März 16, 2007, 13:35:19 Nachmittag

Dear Mr.Jan

Thank you very Much. Progrm Relay No.1 Perfect .

Thanks For Good Coopration.

Mahmood A. Malik

Titel: Re: Function: Stepping relay
Beitrag von: Mr. Spok am März 16, 2007, 13:40:40 Nachmittag

Hello Mahmood,

no Problem. In, which country you are?


y.s. Jan