easy-forum

English Support - Hardware => easy topics (general) => Thema gestartet von: malik0101 am März 29, 2007, 08:09:49 Vormittag

Titel: 7 Days Reset Timer
Beitrag von: malik0101 am März 29, 2007, 08:09:49 Vormittag

Dear Friend
                    we Have Packing Machine. we need Daily 3 Shift Prod.Report
Each Shift How many bags we Pack. our 1st Shift start at 7:00 to 14:30
2nd Shift Start at 15:00 to 22:30 3rd shift start 23:00 to 06:30
we need to reset the 7days timer at 06:50 then 22:50 then 06:50
we have no reset, whole week start. Pls Give me any Example.
I m using 819 AC-RC. Aut. our week start from Sat-Sun-Mon-Tue-wed-Thur-Friday- Friday is Reset Day. But mostly we Run also Friday.
Special Thanks  for Mr. Jan who help me a lot.

Titel: Re: 7 Days Reset Timer
Beitrag von: Mr. Spok am März 30, 2007, 08:17:56 Vormittag

Hello malik,

here a programme for countering of the parts per shift with reset and weeksummary. I hope you can use it in our factory, and it works correctly. One can badly test it in the simulation on PC.

You mustn't forget to adjust the watch of the controler correctly.

y.s Jan

Titel: Re: 7 Days Reset Timer
Beitrag von: malik0101 am März 30, 2007, 15:58:37 Nachmittag

Hellow  Mr,Y.S jan

Thanks for reply .. which zipfile u send its also new and good information for me. but can u check my attachment.
i have seprate Counter away from Easy 700 meter far. i need 1 out put
will high in these timing for reset this Counter. i fixed seprate counting
with out Easy, but need reset through easy. 7 days a week.
in parameter Day1 i start from ? and Day2 I start from ? this i need  to
explain to me.

Titel: Re: 7 Days Reset Timer
Beitrag von: KressSwiss am März 31, 2007, 08:59:19 Vormittag

Zitat

but can u check my attachment

Hi
There isn't an attachment on your Message.

Titel: Re: 7 Days Reset Timer
Beitrag von: malik0101 am März 31, 2007, 11:28:04 Vormittag

Can U check it Please. Massage Attached now.
Thanks

Titel: Re: 7 Days Reset Timer
Beitrag von: KressSwiss am März 31, 2007, 16:41:56 Nachmittag

Hi
Yes i is present now (Reset 7 days.zip)

Titel: Re: 7 Days Reset Timer
Beitrag von: KressSwiss am April 01, 2007, 15:41:52 Nachmittag

Hello
I had just a look at your programm. In my oppinion it works like this:
Output Q4 gets a flash of 0.5 second at the folluwing time:
6:50; 14:50; 22:50
And this every Day. By the way:
You don't need marker 11. You can place the timer behind the Clock. See the appendix.
Regards
Hermann

Titel: Re: 7 Days Reset Timer
Beitrag von: Mr. Spok am April 02, 2007, 06:47:48 Vormittag

Hello malik,

KressSwiss has described you the program flow of your programme. I have it tied into my first programme "Counters" once again.


Jan

Titel: Re: 7 Days Reset Timer
Beitrag von: malik0101 am April 02, 2007, 08:01:44 Vormittag

Thanks A Lot Mr.Jan