easy-forum

English Support - Hardware => easyRelais => Thema gestartet von: ndzied1 am Januar 09, 2008, 18:28:00 Nachmittag

Titel: Class 1 Div 2
Beitrag von: ndzied1 am Januar 09, 2008, 18:28:00 Nachmittag
Does anyone know if the Easy is Class 1 Div 2 rated?  I have a customer requesting a Class 1 Div 2 PLC with 14 relay outpus and 120VAC power.

Would a networked set of Easy 800's fit?

Thanks,
Titel: Re: Class 1 Div 2
Beitrag von: KressSwiss am Januar 10, 2008, 08:58:01 Vormittag
It is a fact of gas and dust class:
Class 1, Div. 2 means: Where ignitable concentrations of flammable gases, vapours, or liquids are not likely to exist under normal operating conditions.

I don’t think, EASY is certificated of gas-class. A solution could be, to integrate Easy in a gas-protected box. With this solution Easy 800 may be be accepdet.

Regards
KressSwiss

Titel: Re: Class 1 Div 2
Beitrag von: KressSwiss am Januar 10, 2008, 21:58:56 Nachmittag
Hi
I yust found a solution for you. BARTEC in Germany http://www.bartec.de upgrated Easy800 and MFD for applications in gas contained enviroment. (Explosion-proof)

Click heere (http://www.bartec.de/homepage/deu/60_suche/10_volltext/search.asp?ProdID=18)

Regards
Hermann
Titel: Re: Class 1 Div 2
Beitrag von: ndzied1 am Januar 13, 2008, 23:18:47 Nachmittag
I have checked our stock of the Easy and it now has printed directly on the side of it Class 1 Div 2 so I believe I am alright.

Thank you for the link to the Explosion proof MFD.  I will keep that in mind.

Cheers,

Norm Dziedzic
CMA/Flodyne/Hydradyne
http://www.flodyne.com
Titel: Re: Class 1 Div 2
Beitrag von: KressSwiss am Januar 14, 2008, 13:27:00 Nachmittag
Exactly! It’s written on the left side at the Easy Relais. I didn't see it before. For User who wants to knew what it means:

Spoiler: Click this button • zeige
Class 1, Div. 2
Where ignitable concentrations of flammable gases, vapors, or liquids are not likely to exist under normal operating conditions.
 
Class 2, Div. 1
Where ignitable concentrations of combustible dusts can exist all of the time or some of the time under normal operation conditions.
 
Class 2, Div. 2
Where ignitable concentrations of combustible dust are not likely to exist under normal operating conditions.
 
Class 3, Div. 1
Where easily ignitable fibers or materials producing combustible flyings are handled, manufactured or used.
 
Class 3, Div. 2
Where easily ignitable fibers are stored and handled.