easy-forum

English Support - Hardware => easyRelais => Thema gestartet von: prinse am Juni 16, 2015, 22:57:53 Nachmittag

Titel: encoder on titan
Beitrag von: prinse am Juni 16, 2015, 22:57:53 Nachmittag

want to now how to program one encoder in the titan screen
the encoder gifs 360 pulse per revolution. i want to seen revolution clockwise/counterclockwise on the display from the titan. i used I1/I2 is a/b channel and CI1 counter

Titel: Re:encoder on titan
Beitrag von: Don Corleone am Juni 22, 2015, 16:26:47 Nachmittag

Hello,

that's right!

High-speed counter relays can be operated with retentive actual values. The
number of retentive counter relays can be selected in the SYSTEM ->
RETENTION menu.
If a meter is retentive, the actual value is retained when the operating mode
changes from RUN to STOP as well as when the supply voltage is switched
off.
If a MFD is started in RUN mode, the counter operates with the retentively
saved actual value.


More information can be found under:

http://www.eaton.eu/Europe/Electrical/CustomerSupport/DownloadCenter/index.htm#documentation

(MN05002001Z_EN, page:252 )