easy-forum
English Support - Hardware => easy topics (general) => Thema gestartet von: chris39 am August 31, 2007, 11:24:47 Vormittag
-
HAS ANYBODY USED AN EASY RELAY TO CONTROL THE SPEED OF A DF51 INVERTER?
DO YOU NEED TO USE AN ANALOG OUTPUT OR IS THERE A BETTER METHOD.
I ONLY NEED TO USE THREE DIFFERENT SPEEDS.
-
Hello Chris,
if you liked to have only 3 different speeds, you don't need an Easy. You can programme the speeds on the feast frequencies and select over the digital-inputs of the DF51.
y.s. Jan
-
if you liked to have only 3 different speeds, you don't need an Easy
Hi Jan
If you need an Easy anyway for your application, you can control the converter by 2 digital Output 24VDC.
Output 1+2 low = stop
Output 1 high = first speed
Output 2 high = second speed
Output 1+2 high = third speed
Easy solution. Isn't it?
Regards
Hermann
-
if you liked to have only 3 different speeds, you don't need an Easy
Hi Jan
If you need an Easy anyway for your application, you can control the converter by 2 digital Output 24VDC.
Output 1+2 low = stop
Output 1 high = first speed
Output 2 high = second speed
Output 1+2 high = third speed
Easy solution. Isn't it?
Regards
Hermann
Yes it is Easy. Thanks for the info.
Regards
Chris39