easy-forum

English Support - Hardware => easy topics (general) => Thema gestartet von: malik0101 am Dezember 21, 2010, 20:50:25 Nachmittag

Titel: 12 output
Beitrag von: malik0101 am Dezember 21, 2010, 20:50:25 Nachmittag

Dear Friends
 i have one Input and 12 outputs. input connected with Pressure switch. if P.S. Reach 6 bar its high. then Q1 will high. Pressure release the again P.S. I high Q2 High.  again P.S. I high Q3.....Q12 High.
I have 819 AC RC and 819 AC RCX how i make togather 12 outputs. Pls Help Thanks

Titel: Re: 12 output
Beitrag von: Micky am Dezember 21, 2010, 21:46:50 Nachmittag

Dear malik0101,

here is an example for you

Titel: Re: 12 output
Beitrag von: malik0101 am Dezember 22, 2010, 00:00:40 Vormittag

Thanks Mr.Micky
one Thing ask Between 800 AC RC and 800 AC RCX what should I Connect ( Link)
Eathernet Cable or what. if eathernet Cable 800 AC RC Net 1 or 2 or  800 AC RCX Net 1 or 2
Thanks again

Titel: Re: 12 output
Beitrag von: Maikky am Dezember 22, 2010, 23:27:40 Nachmittag

Dear malik0101.

The example from Micky is based on
   NetId1 : Easy819-AC-RC
   NetId2 : Easy819-AC-RCX

For the connection of both PLC's you need 2 terminating resistors at the first and last
location and a network-cable with RJ45 - connectors.

You may either use the parts from Moeller
   resistor Easy-NT-R
   cable     Easy-NT-... with different length, for example Easy-NT-150 with length 1,5 m
or you are using standard patch cables and modify a RJ45 plug with a resistor.

Regards
Maikky