Autor Thema: HOW TO SHOW 3 COUNTERS IN MFD-80-B  (Gelesen 5391 mal)

Offline amin

  • Jr. Member
  • **
  • Beiträge: 20
HOW TO SHOW 3 COUNTERS IN MFD-80-B
« am: Oktober 30, 2011, 15:14:41 Nachmittag »
HELLO .....
I AM DOING A PROJECT  CONSIST OF :
MFD-80-B + MFD-CP8-NT + 819-DC-RC + 618-DC-RC    ....
I NEED TO DISPLAY 3 COUNTER RELAIS ON MFD-80-B  WITH POSSIBILITY TO ADJEST EACH VALUE OF THESE COUNTERS  .....

PLEASE HELP ME TO DO ... THANK YOU

Offline Martin***

  • Jr. Member
  • **
  • Beiträge: 33
Re:HOW TO SHOW 3 COUNTERS IN MFD-80-B
« Antwort #1 am: Oktober 31, 2011, 05:27:11 Vormittag »
Hello,

 Here's an example I hope it helps further

 greeting

 Martin

Offline amin

  • Jr. Member
  • **
  • Beiträge: 20
Re: HOW TO SHOW 3 COUNTERS IN MFD-80-B
« Antwort #2 am: November 01, 2011, 14:10:15 Nachmittag »
THANK YOU MR MARTIN ... IT IS WORKING


I HAVE NEW QUESTION ,,,, WHICH SOFTWARE SHOULD I USE WITH MFD-CP4    , I HAVE  EASY PRO 6.81 BUT NOT SHOWING ANY CP4...   THANK YOU

Offline Sam

  • Newbie
  • *
  • Beiträge: 5
Re: HOW TO SHOW 3 COUNTERS IN MFD-80-B
« Antwort #3 am: November 02, 2011, 08:26:17 Vormittag »
Hello amin,

mfd-cp4 module is only for copying of orginal device display. Example if you are using EASY819-DC-RC with cp4-module+mfd-80-b, this way you have two displays and both have identical texts. And you do not program this in the easy-soft.

I hope that this helps,

regards,
Sam