easy-forum
English Support - Software => easySoft => Thema gestartet von: Runerask am Oktober 06, 2007, 18:12:21 Nachmittag
-
How can i get a counter in the display?
I want to have a counter permanent in the display
Thanks for answers :D
-
Hi
Use a Display-Functionsblock (example line 3) and set the values of the counter in one of the fore lines. With the button "Texteingabe" it is possible to write adittional letters in any order. See exampels in the appendix. More questions? Don't hesitate to ask. ;)
Hermann
-
Thank you very much. :D
-
My pleasure. What are you going to count by easy? Or better what kind of project are you working for? Sorry to be so courios but I'm interestet to know what user are doing by easy.
-
My pleasure. What are you going to count by easy? Or better what kind of project are you working for? Sorry to be so courios but I'm interestet to know what user are doing by easy.
I'm having 3 easy 800 home. The counter is counting when someone is using the doorbell.
Earlier i had one Zelio, and just make the doorbel-count for fun. But noe I think its great. I replased the Zelio to Easy because wanted to exspend the system.
But I like to get the time of the last count-signal, how do I do that? Is it possible the memorize the clock in a variable?
Sorry for my poor english
-
hi runerask!
my english is also very little, but i will try to give you an answer.
i think there is no way at the moment, you can only get informaton from the clock with the clock relay (in german called "Schaltuhr"). the only way i see, you may start a blinking timer with a clock frequency of one minute. with this timer you takt a counter and every time using the doorbell you make a reset of the counter. so you have at the least the minutes from the last doorbell.
i hope this answer isn't wrong!
regards heho
Thank you very much
Thats possible :-D
-
hi runerask!
my english is also very little, but i will try to give you an answer.
i think there is no way at the moment, you can only get informaton from the clock with the clock relay (in german called "Schaltuhr"). the only way i see, you may start a blinking timer with a clock frequency of one minute. with this timer you takt a counter and every time using the doorbell you make a reset of the counter. so you have at the least the minutes from the last doorbell.
i hope this answer isn't wrong!
regards heho
Hi
I just programmed this funktion, but is it posible the calculate hours when i got many minutes (minutes above 60)?
I'm thining about use a text-display for every hour counting. I just make the hour in a textformat, and use a counter as a variable. But I then also need a variable how can calculate the minutes (minutes=TotalCounterMinutes-hourMinutes)
-
but is it posible the calculate hours when i got many minutes (minutes above 60)?
Hi
Count the Minutes like bevore. If the Minutes-value is 59 give an impulse to a second counter and reset together the Minutes-counter. Display the value of both counters
Counter 1 = Minutes
Counter 2 = Hours
Good luck
Hermann
-
Thank you very much
I was infact thinking the same way after i maked the question.
It was something wrong in my programming. I'm trying to use a textwindow in front of easy for every hour, but it doesnt work yet. I try to let it look as a clock, by set a text number for hour in front of minutes. I'll try more later ;D
-
Hi again
Is it possible to get two countervariables into one variable?
I thinking to get both counters (minutes and hour variables) in one line in the display
Is it possible?
-
Hello runerask,
you need a MFD with CPU to show at on line two variable. At an Easy-800
with display is two variables don't show this on a line possibly.
Regards Jan
-
Hello runerask,
you need a MFD with CPU to show at on line two variable. At an Easy-800
with display is two variables don't show this on a line possibly.
Regards Jan
OK, thanks for answer :)
-
Hi Runerask
Its possible to show hours and minutes on the same Display among each other.
Have a look at the appendix.
Hermann
-
Hi Runerask
Its possible to show hours and minutes on the same Display among each other.
Have a look at the appendix.
Hermann
Thanks for answer, but i hoped it was possible to show minutes and hours in same line. Its so wird to have it in two lines :P
But i thinking to buy a Titan display ;D
-
But i thinking to buy a Titan display
Hi
Congratulation. A good invest to purchase an MFD. Have an example about the Display.
First picture: Create a mask
Second picture: Display the created mask
Hermann