easy-forum
English Support - Software => easySoft => Thema gestartet von: Glenn Gernal am April 08, 2021, 07:11:00 Vormittag
-
Hello,
EASY-E4-AC-12RC1
When the easy is in RUN mode and the power goes of the easy en come back on the easy goes in stop mode.
Is there a parameter or function i need to change in easy soft for this problem?
Kind Regards,
Glenn
GERNAL
-
Hello Glenn Gernal,
start with SD card may be activated in the system settings. If the card is missing, the Easy does not switch to RUN mode.
greeting
-
Hi Glenn,
there is a system setting that you can activate so that the easyE4 goes into RUN mode after reboot.
The setting can be changed via the software or directly on the device.
Greetings
Ralf