easy-forum

English Support - Software => easySoft => Thema gestartet von: AcmeMan am Januar 02, 2008, 20:30:05 Nachmittag

Titel: Dummy relay
Beitrag von: AcmeMan am Januar 02, 2008, 20:30:05 Nachmittag

Hi
i just working with easy soft to build an application on an easy programmable relay and i want know if it possible to use "dummy relay" in the programmation. With "dummy relay" i mean a relay that could be used just to send a signal in another  place of my circuit. For example Main input I1 excite dummy relay DR1 and close a contact dr1 that excite a relay output Q1.
 tried to use Merker but it doesn't works.
It is possible?

Titel: Re: Dummy relay
Beitrag von: KressSwiss am Januar 02, 2008, 22:06:12 Nachmittag

Hi
Marker can be used as dummy relais. I wonder why you don't have cucess. I've  just placed a screenshot from the Programmsimulation at the appendix.
Regards
Hermann

Titel: Re: Dummy relay
Beitrag von: KressSwiss am Januar 05, 2008, 20:54:32 Nachmittag

Hi
I've got an idea why in your programm marker aren't working. May be you are using Bit-Marker and Word-Marker of the same group. Example:
Marker 1-8 is part of MB1
Matker 1-16 is part of MW1
And so on. Hafe a look to the cut-out-chart at the appendix.
Regards
Hermann