easy-forum

English Support - Hardware => MFD-Titan® => Thema gestartet von: bendo am April 13, 2009, 21:14:01 Nachmittag

Titel: Help with MDF
Beitrag von: bendo am April 13, 2009, 21:14:01 Nachmittag

I need to bulid a project using MDF AC CP8 ME with Temperture module MDF-TP12-PT-A
i have Device Problem when ever in configure Them using EasySoft 6.3


Bendo

Titel: Re: Help with MDF
Beitrag von: Maikky am April 13, 2009, 22:04:25 Nachmittag

Dear Bendo.

In general the AC-versions of MFD are not able to use analogue inputs.

The temperature module is handled similar to an analogue input.

Therefore the configuration AC-type MFD with temperature module is not
allowed.

You have to switch to a DC-version.

Regards

Maikky

 

Titel: Re: Help with MDF
Beitrag von: KressSwiss am April 21, 2009, 20:22:25 Nachmittag

Hi Bendo
I see the same like Maikki. You have to use a CD-CPU. If you do so, the configuration will be possible.

Regards
KressSwiss

Titel: Re: Help with MDF
Beitrag von: KressSwiss am April 22, 2009, 21:33:54 Nachmittag

Hi Bendo
Somebody told me just it's not allowed by MFD, to mix DC basic Units and AC E/A Disc-Units. As well not in reversed order.
A possibility is, do use a Easy406/411-DC-ME. This combination works because easy link compromised galvanic separation. Sorry for the misinterpretation before.
Regards
KressSwiss