easy-forum

English Support - Hardware => easyRelais => Thema gestartet von: Orlandini am Februar 23, 2009, 21:31:43 Nachmittag

Titel: is possible to get the codesys client with an graphic interface?
Beitrag von: Orlandini am Februar 23, 2009, 21:31:43 Nachmittag

Hello, I need some help with my EASY800...Could somebody help me?
i have some doubts regarding the codesys

this is what I have:   
plc (Moeller EASY800+EASY209-SE) that generates an OPC file with EDS extension

What I need to do is simulate a small process, turn on and off a chiller for this I want to get into a webpage with the IP of the EASY209-SE and read the status of the process. I assume that the eds file contains the inputs and outputs of the PLC but due the EASY209-SE is not a webserver I can not download the webpage I pretend to use, but can I do this with the codesys software client and do the graphic interface capable to running as htm file?

Titel: Re: is possible to get the codesys client with an graphic interface?
Beitrag von: Bimbo am März 02, 2009, 21:30:36 Nachmittag

Zitat von: Orlandini am Februar 23, 2009, 21:31:43 Nachmittag

Hello, I need some help with my EASY800...Could somebody help me?
i have some doubts regarding the codesys

EASY800 and  Codesys? Are you sure?

Titel: Re: is possible to get the codesys client with an graphic interface?
Beitrag von: Mr. Spok am März 03, 2009, 06:27:58 Vormittag

Hello Orlandini,

use a Tixi-Modem ( www.tixi.com ), there is a Web-Server on board. With this modem you don´t need the Easy209-SE Modul.


regards Jan