easy-forum

Deutsch - Hardware => easyControl => Thema gestartet von: Luis Peres am November 20, 2007, 14:16:02 Nachmittag

Titel: MFD4
Beitrag von: Luis Peres am November 20, 2007, 14:16:02 Nachmittag

I need to make a time program in MFD4 like EASY500 (week time programmer). Anyone can help me?

Titel: Re: MFD4
Beitrag von: Mr. Spok am November 20, 2007, 14:52:01 Nachmittag

Hello Luis

,do you mean MFD5.4 or MFD-Titan? At the programming in EasySoft-CoDeSys you can use the Easy_800.lib. The same function-blocks are contained as in the case of the Easy´s there.

regards Jan

Titel: Re: MFD4
Beitrag von: Luis Peres am November 20, 2007, 15:22:36 Nachmittag

I mean MFD4-5-XRC-30.
You say if I use Easy_800.lib with codesys I can put and change a week time in MFD4-5-XRC-30?
Thanks in advance.

Titel: Re: MFD4
Beitrag von: Mr. Spok am November 22, 2007, 12:14:26 Nachmittag

Hello Luis,

yes you can use the Easy_800.lib, but it is the difference in the constituent that it has only 2 channels.

regards Jan

Titel: Re: MFD4
Beitrag von: Luis Peres am November 22, 2007, 12:30:52 Nachmittag

Many thanks Jan.

Can you help me in another thing, what is the best way to convert a codesys program to another hardware, i.e.: convert a program ANXC200_Easy800.pro to AMFD4_Easy800.pro only changing the plc.

Regards,

Luis

Titel: Re: MFD4
Beitrag von: Mr. Spok am November 22, 2007, 12:48:18 Nachmittag

Hello Luis,

can You publish the project here?

regards Jan

Titel: Re: MFD4
Beitrag von: Luis Peres am November 22, 2007, 13:18:29 Nachmittag

Yes of course.

Thanks Jan.

Regards,

Luis

Titel: Re: MFD4
Beitrag von: Mr. Spok am November 22, 2007, 13:40:11 Nachmittag

Hello Luis,

oha, i see it´s a example from the moeller-pages. Is ther not a example for the MFD4?

Regards Jan

Titel: Re: MFD4
Beitrag von: Luis Peres am November 22, 2007, 13:43:00 Nachmittag

Is for XC200 and i want to change to MFD4, you can see in plc definitions.

Rgds,

Luis

Titel: Re: MFD4
Beitrag von: Mr. Spok am November 23, 2007, 09:25:03 Vormittag

Hello Luis,

i have switched the project over once. However, it is not quite just like the original. You should try it out.

regards Jan

Titel: Re: MFD4
Beitrag von: Luis Peres am November 28, 2007, 19:34:26 Nachmittag

Hello Jan,

Many thanks for your support. It's working now.

Regards,

Luis