easy-forum

English Support - Hardware => easyE4 => Thema gestartet von: fentini am Februar 21, 2023, 11:56:36 Vormittag

Titel: Change time on Timing Relay with input
Beitrag von: fentini am Februar 21, 2023, 11:56:36 Vormittag

Hello,
I would like to change the time a timer runs according to a digital or analog input that I connect to my Eaton Easy E4.
There is this valve that is being opened by the eaton e4. But sometimes I want the valve to open longer/shorter. I thought I would buy a 0-10 V generator and then connect it to Input 5 of the relais so that I can increase/decrease the voltage on that input. Then on the software I change the I1 of the Timing Relais to "analog inputs/outputs and markers". But that is where I get stuck. Perhaps there are people who can help or maybe there is a topic on this which I have not found?

Thanks in advance.
Chris

Titel: Antw:Change time on Timing Relay with input
Beitrag von: radar17892 am Februar 21, 2023, 13:26:36 Nachmittag

Hi Chris,
is the LD below, that what you mean?
Note: a time change at the input while the timer is running has no effect. The input is only read at the start of the timer.

Regards Thomas

Titel: Antw:Change time on Timing Relay with input
Beitrag von: fentini am Februar 22, 2023, 12:40:40 Nachmittag

Zitat von: radar17892 am Februar 21, 2023, 13:26:36 Nachmittag

Hi Chris,
is the LD below, that what you mean?
Note: a time change at the input while the timer is running has no effect. The input is only read at the start of the timer.

Regards Thomas

Oh wow, yes, thanks a lot!! You helped me a lot.
Happy with that!!!!!!!!!
Regards Chris