7 Days Reset Timer

[malik0101]

Dear Friend
                    we Have Packing Machine. we need Daily 3 Shift Prod.Report
Each Shift How many bags we Pack. our 1st Shift start at 7:00 to 14:30
2nd Shift Start at 15:00 to 22:30 3rd shift start 23:00 to 06:30
we need to reset the 7days timer at 06:50 then 22:50 then 06:50
we have no reset, whole week start. Pls Give me any Example.
I m using 819 AC-RC. Aut. our week start from Sat-Sun-Mon-Tue-wed-Thur-Friday- Friday is Reset Day. But mostly we Run also Friday.
Special Thanks  for Mr. Jan who help me a lot.

[Mr. Spok]

Hello malik,

here a programme for countering of the parts per shift with reset and weeksummary. I hope you can use it in our factory, and it works correctly. One can badly test it in the simulation on PC.

You mustn't forget to adjust the watch of the controler correctly.

y.s Jan

[malik0101]

Hellow  Mr,Y.S jan

Thanks for reply .. which zipfile u send its also new and good information for me. but can u check my attachment.
i have seprate Counter away from Easy 700 meter far. i need 1 out put
will high in these timing for reset this Counter. i fixed seprate counting
with out Easy, but need reset through easy. 7 days a week.
in parameter Day1 i start from ? and Day2 I start from ? this i need  to
explain to me.

[KressSwiss]

but can u check my attachment

Hi
There isn't an attachment on your Message.

[malik0101]

Can U check it Please. Massage Attached now.
Thanks

[KressSwiss]

Hi
Yes i is present now (Reset 7 days.zip)

[KressSwiss]

Hello
I had just a look at your programm. In my oppinion it works like this:
Output Q4 gets a flash of 0.5 second at the folluwing time:
6:50; 14:50; 22:50
And this every Day. By the way:
You don't need marker 11. You can place the timer behind the Clock. See the appendix.
Regards
Hermann

[Mr. Spok]

Hello malik,

KressSwiss has described you the program flow of your programme. I have it tied into my first programme "Counters" once again.


Jan

[malik0101]

Thanks A Lot Mr.Jan