CONTROLLING THE SPEED OF A DF51 INVERTER USING A EASY CONTROL RELAY

[chris39]

HAS ANYBODY USED AN EASY RELAY TO CONTROL THE SPEED OF A DF51 INVERTER?
DO YOU NEED TO USE AN ANALOG OUTPUT OR IS THERE A BETTER METHOD.
I ONLY NEED TO USE THREE DIFFERENT SPEEDS.

[Mr. Spok]

Hello Chris,


if you liked to have only 3 different speeds, you don't need an Easy. You can programme the speeds on the feast frequencies and select over the digital-inputs of the DF51.


y.s. Jan

[KressSwiss]

if you liked to have only 3 different speeds, you don't need an Easy

Hi Jan
If you need an Easy anyway for your application, you can control the converter by 2 digital Output 24VDC.
Output 1+2 low = stop
Output 1 high = first speed
Output 2 high = second speed
Output 1+2 high = third speed

Easy solution. Isn't it?
Regards
Hermann

[chris39]

if you liked to have only 3 different speeds, you don't need an Easy

Hi Jan
If you need an Easy anyway for your application, you can control the converter by 2 digital Output 24VDC.
Output 1+2 low = stop
Output 1 high = first speed
Output 2 high = second speed
Output 1+2 high = third speed

Easy solution. Isn't it?
Regards
Hermann
Yes it is Easy. Thanks for the info.
Regards
Chris39