Password Program

[Muh]

Dear,
I want to protect operating a system with password. Is it possible to write this program by Easy 700? And is it written before as an template?
thank you

[KressSwiss]

Hi
It is possible to protect your Easy-Project by password in different levels. A password will be a value between 0001 and 9999. The vaalue 0000 means no password. In tis case, everibody is alloued to modify the program and the values. Condition of delivery is 0000.
Regards
KesssSwiss

[Muh]

Dear Kress
Thank you for your quick reply
I have protected the easy-project by the password. but i don't want to let the operator to have this password. i need another password for the operator to let him to run the program and start the machine and use it.
i was working to draw a diagram by easy for it, for example by using push bottons and using counter and timer realy.
I did imagin it would be great if easy have had a relay function for it to define a password as a switch key to run the program.
I drow a basic diagram that work as a passkey but i know it is not complete and trustable.
I wanted to know if anybody did it before or has better recommendation.
it is clear that i can use the password kit that is availeble in market but i prefere to have it in my mighty easy relay as a compact and trustful control.

Thank you again for your attention

Muh Esmaili

[KressSwiss]

Hi heho
I just tested the program and already are some questions:
I put in 1234 and after then Q1 went on. After I chanched to 4321. But nothing happend.
I'm affraid I dont catch the sense. Could you explane the crux of the matter?
Thank you and regards
Hermann 

[KressSwiss]

Hi heho
I yust checked your new programm. Excellent solution and easy to understand. About your english: Not worse then mine. I like it to write in the "easy english part" because it is allways a small lesson for me. I think it is important to write in this aerea, because there are not so many easy profis active.

Regards
Hermann

 
 

[Muh]

Thank you Guys for your helps.
I found that this is not possible easily by 700 series.
tere is a simply program that works with push bottons that i wrote. for example pushing right 3 times and the hold down up for 3 secconds and then Q1 closed. any other push bottons will reset the counter relay and Q1.
any how thank your for your helps and i think in such forums this in not a point that how is your language, the point is that how is your knowlage and hospitality.

regardsn,
<Mohammad

[Muh]

WOWWW

What a inspiration,
Dear horst you'r a real genius, I'm sure this is the BEST pw program which is possible with 7xx.

Thank you so much dude,

Muh,