Autor Thema: is possible to get the codesys client with an graphic interface?  (Gelesen 5840 mal)

Offline Orlandini

  • Newbie
  • *
  • Beiträge: 3
is possible to get the codesys client with an graphic interface?
« am: Februar 23, 2009, 21:31:43 Nachmittag »
Hello, I need some help with my EASY800...Could somebody help me?
i have some doubts regarding the codesys

this is what I have:   
plc (Moeller EASY800+EASY209-SE) that generates an OPC file with EDS extension

What I need to do is simulate a small process, turn on and off a chiller for this I want to get into a webpage with the IP of the EASY209-SE and read the status of the process. I assume that the eds file contains the inputs and outputs of the PLC but due the EASY209-SE is not a webserver I can not download the webpage I pretend to use, but can I do this with the codesys software client and do the graphic interface capable to running as htm file?

Bimbo

  • Gast
Re: is possible to get the codesys client with an graphic interface?
« Antwort #1 am: März 02, 2009, 21:30:36 Nachmittag »
Hello, I need some help with my EASY800...Could somebody help me?
i have some doubts regarding the codesys

EASY800 and  Codesys? Are you sure?

Offline Mr. Spok

  • Sr. Member
  • ****
  • Beiträge: 652
Re: is possible to get the codesys client with an graphic interface?
« Antwort #2 am: März 03, 2009, 06:27:58 Vormittag »
Hello Orlandini,

use a Tixi-Modem ( www.tixi.com ), there is a Web-Server on board. With this modem you don´t need the Easy209-SE Modul.


regards Jan
Für die Richtigkeit und Funktionalität der hier veröffentlichten Beispiele wird keine Gewähr übernommen.
Für Schäden, die durch Verwendung der Beispiele entstehen, wird keine Haftung übernommen.