Autor Thema: 3 PUMP SEQUENCER  (Gelesen 357 mal)

Offline srd

  • Jr. Member
  • **
  • Beiträge: 79
3 PUMP SEQUENCER
« am: Oktober 28, 2022, 16:04:20 Nachmittag »
Anybody got a program for a 3 pump sequencer i can look at, i have 3 on positions and one off. As the level rises it will operate a pump at each level if required and pump down to the off position which will turn of all pumps and activate the sequence start for the next time the pump start. If in LD would be helpful. Cheers

Offline Konni66

  • Global Moderator
  • Full Member
  • *****
  • Beiträge: 209
  • Keine Panik!
    • Eaton Trainingscenter Bonn
Antw:3 PUMP SEQUENCER
« Antwort #1 am: November 21, 2022, 15:45:07 Nachmittag »
Hello srd, maybe this is a example you can work with.
The user defined function block within the demo program calculates the pump out of three with shortest operating time.
This information can be used to always start a pump with the shortest operating time.

PS: Don't forget to make C01..C03 as retent in UF parameters.

Greetz Konni
« Letzte Änderung: November 22, 2022, 09:33:59 Vormittag von Konni66 »
Die Programmierbeispiele sind zu Schulungszwecken gedacht. Trotz sorgfältiger Erstellung und Funktionsprüfung können Fehler nicht ausgeschlossen werden. Daher erfolgt die Verwendung der Programmteile in eigener Verantwortung.

Offline srd

  • Jr. Member
  • **
  • Beiträge: 79
Antw:3 PUMP SEQUENCER
« Antwort #2 am: November 22, 2022, 07:16:40 Vormittag »
Thats brilliant thanks Konni66