Autor Thema: Easy Net  (Gelesen 5310 mal)

Offline WOODCOCKR

  • Newbie
  • *
  • Beiträge: 1
Easy Net
« am: Februar 06, 2020, 15:00:17 Nachmittag »
Hello, we have for the first time; exhausted the memory available on the ladder on a Easy800.

Using the read and send bit; is there a way to add a EASY onto the NET so that it can run its own program and use read and send bit to talk with the master program. 

This module then needs to be able to read and write its own IO ...

Any urgent help is mush appreciated?

Robert

Offline weiss_nix

  • Sr. Member
  • ****
  • Beiträge: 594
  • it has to be easy, it's a easy!
Antw:Easy Net
« Antwort #1 am: Februar 07, 2020, 09:00:47 Vormittag »
Hello Robert,
Yes, that is possible. If a Program is running in a Easy8xx they will only use own I/O.
You can use the send/receive commands to communicate with the other NET-ID's.
If the additional Easy8xx is running without a Program in the EasyNet they will be only a I/O extension.
Sollte ich (gefährliches) Halbwissen verbreiten, beuge ich demütig mein Haupt mit der Gewissheit versagt zu haben!
WICHTIG: Sämtliche Programme dienen lediglich der Veranschaulichung von Funktionen und sind nicht für den Produktiveinsatz geeignet!