« vorheriges nächstes »
Seiten: [1]   Nach unten

Autor Thema: Help Required  (Gelesen 2412 mal)

Offline srd

  • Full Member
  • ***
  • Beiträge: 120
Help Required
« am: Juni 23, 2022, 10:20:59 Vormittag »
We have an easy e4 connected to an rtd screen, on the bench they work absolutely fine. However when they are put into a panel and the power is turned on the screen will not find the easy unless the easy is in stop mode. i have looked on you tube and followed there examples but it appears that whenever power is lost and returned they do no communicate. Anybody got any ideas please. Cheers
Gespeichert

Offline CiesleRa

  • Global Moderator
  • Full Member
  • *****
  • Beiträge: 339
  • easyE4 for President
Antw:Help Required
« Antwort #1 am: Juni 23, 2022, 13:47:39 Nachmittag »
Have you checked "Watcher" or "Operator" on the "Auto Login" field in the RTD?
And enabled communication to the rtd in easysoft under the menu item "Ethernet"?
Gespeichert
Alle von mir bereitgestellten Programme sind reine Beispielprojekte. Die Verwendung erfolgt auf eigene Gefahr. Jegliche Haftung ist ausgeschlossen.

Offline srd

  • Full Member
  • ***
  • Beiträge: 120
Antw:Help Required
« Antwort #2 am: Juni 25, 2022, 07:30:13 Vormittag »
Yeah have both set to operator. Just comes up with a message that it is trying to connect and after a while the abort tab lights up for you to press as no connection made, turn the easy into stop mode and it connects straight away. Really frustrating got quite a few jobs we can use these on and even make it a standard on our controls panels but need to get it sorted first.
Gespeichert
Seiten: [1]   Nach oben
« vorheriges nächstes »